[SingleHead]
StartLine1=G53 Z0 
StartLine2=M7 [Turn on dust collect. and hold down]
StartLine3=M3 S10000
StartLine4=G4 P2 [Dwell for about 3 seconds for spindle up to speed. not this one?]
PromptForThickness=NO
EndLine1=G53 Z0
Endline2=M5
Endline3=M9 [Turn off dust collect. and hold down]
Endline4=
XFinalMove=50
YFinalMove=30
PreContour= 
PostContour= 

[PromptForHead]
StartLine1=G53
StartLine2=
StartLine3=
StartLine4=
PromptForThickness=NO
EndLine1=G53
Endline2=G0 X15 Y0
Endline3=G54
Endline4=M5
XFinalMove=0
YFinalMove=0
SpindleOnZ=M3.1
SpindleOnW=M3.2
SpindleOff=M5
PreContour=
PostContour=
DrillAxis=W
DrillWrk=G55
DrillOn=M3
DrillOff=M5

[ToolChanger]
StartLine1=G53 Z0 
StartLine2=M7 [Turn on dust collect. and hold down]
StartLine3=  
StartLine4= 
SpinUp=3
PromptForThickness=NO
CountDrills=
EndLine1=G53 Z0
Endline2=M5
Endline3=M9 [Turn off dust collect. and hold down]
Endline4=
XFinalMove=50
YFinalMove=30
PreContour= 
PostContour= 


[Laser]
StartLine1=L251
StartLine2=
StartLine3=
StartLine4=
PromptForThickness=NO
EndLine1=L250
Endline2=
Endline3=
Endline4=
XFinalMove=0
YFinalMove=0

[Plasma]
StartLine1=g53
StartLine2=m65
StartLine3=
StartLine4=
PromptForThickness=NO
EndLine1=M66
Endline2=
Endline3=
Endline4=
TorchOn=M61
Torchoff=M62

[Knife]
StartLine1=L30
StartLine2=
StartLine3=
StartLine4=
PromptForLiftAngle=YES
PromptForPlungeDepth=YES
PromptForOffset=YES
EndLine1=L31
Endline2=
Endline3=
Endline4=

[Engrave]
StartLine1=G53
StartLine2=
StartLine3=
StartLine4=
PromptForThickness=NO
EndLine1=
Endline2=
Endline3=
Endline4=
EngraveOn=M3
Engraveoff=M5